Billet-specialties Full Size Chevy Replacement Gas Pedal #199240 Manuel d'utilisateur télécharger pdf

Billet Specialties, Inc. 500 Shawmut Avenue La Grange, Illinois 60526 PH 800.245.5382 Fax 708.588.7181 www.billetspecialties.com

AUG 08

Full Size Chevy

Replacement Gas Pedal #199240/ #199245

Tools Needed:

• 1/16” Allen Wrench

• 5/32” Allen Wrench

• 1/2” Deep Well Socket

• Loc-tite® Thread Locker

Applications:

• ‘58 - ‘64 Bel Air, Biscayne, Impala

• ‘64 - ‘67 Nova, Chevelle, El Camino

1. Remove factory gas pedal from floor.

2. Remove ball studs from floor.

Spray penetrating oil on threads and let soak.

Use a 1/2” deep well socket to engage hex at

bottom of ball stud to remove.

3. Vacuum carpet/floor area around gas pedal

location to remove debris and ensure a clean

mounting area.

4. Apply Loc-Tite® thread locker on the threads

of the two 1/4-20 x 1” button head cap screws.

5. Install lower bracket and pedal return spring as

shown to the vehicle floor with the two 1/4-20 x

1” button head cap screws. Tighten firmly.

6. Place replacement pedal on floor and attach

by inserting the hinge pin as shown through the

holes in the upper and lower brackets.

7. Apply Loc-Tite® thread locker on the threads

of the 6-32 x 1/8” set screw and install into the

lower bracket; locking hinge pin into position.

Tighten firmly.

8. Check pedal action, make sure pedal moves

freely and does not bind.

1. Remove screws that attach plate to floor.

2. Remove ball studs from plate by drilling out the

backside of the ball stud attachment.

3. Bolt assembled pedal to plate using 1/4-20 x 1/2”

button head cap screws and lock nuts (not included).

4. Reinstall plate with pedal to floor.

Install as shown below for correct

alignment and easier installation.

The upper bracket is pre-installed

on the backside of the pedal

6-32 x 1/8” Set Screw

Into lower bracket to lock pin

For proper installation note

direction of pedal return spring.

1/4-20 x 1” B.H.C.S.

Thru lower bracket to floor

Some vehicles may have a gas pedal

mounting plate like the one shown below

Full Size Chevy 1

Résumé du contenu

Page 1 - Full Size Chevy

Billet Specialties, Inc. 500 Shawmut Avenue La Grange, Illinois 60526 PH 800.245.5382 Fax 708.588.7181 www.billetspecialties.comAUG

Commentaires sur ces manuels

Pas de commentaire

Billet-specialties Full Size Chevy Replacement Gas Pedal #199240 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Billet-specialties Full Size Chevy Replacement Gas Pedal #199240. Billet Specialties Full Size Chevy Replacement Gas Pedal #199240 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Billet-specialties Full Size Chevy Replacement Gas Pedal #199240