Billet-specialties Non-Power Brake 199550 Manuel d'utilisateur télécharger pdf

‘55 ’56 ‘57 (Tri-Five) Chevy

Non-Power Brake Pedal

#199550 / #199555

Tools Needed:

• 3/32” drill bit

• 5/16” drill bit

• Spray Adhesive

• Center punch

• 7/16” wrench

1. Remove rubber pedal pad

2. Cut out template and apply spray adhesive to the

back, align template with pedal and attach.

3. Center punch the pedal in the center of the holes as

marked on the template. Four options are provided for

manufacturing variations; check pedal arm location as to

which holes to drill.

4. Drill 3/32” pilot holes in each center punch, follow by

drilling with 5/16” drill bit.

5. Install 1/4”-20 socket set screw in appropriate holes in

billet pedal cover, install billet pedal cover on pedal then

attach washer and lock nut. Tighten firmly by alternating

turns at each nut with 7/16” wrench.

Extra hardware is provided – just in case.

0.875

‘55 ’56 ‘57 (Tri-Five) Chevy

Non-Power Brake Pedal

#199550 / #199555

Tools Needed:

• 3/32” drill bit

• 5/16” drill bit

• Spray Adhesive

• Center punch

• 7/16” wrench

1. Remove rubber pedal pad

2. Cut out template and apply spray adhesive to the

back, align template with pedal and attach.

3. Center punch the pedal in the center of the holes as

marked on the template. Four options are provided for

manufacturing variations; check pedal arm location as to

which holes to drill.

4. Drill 3/32” pilot holes in each center punch, follow by

drilling with 5/16” drill bit.

5. Install 1/4”-20 socket set screw in appropriate holes in

billet pedal cover, install billet pedal cover on pedal then

attach washer and lock nut. Tighten firmly by alternating

turns at each nut with 7/16” wrench.

Extra hardware is provided – just in case.

0.875

Due to multiple sources used by the auto manufacturer,

some pedals may have to be trimmed for the pedal

cover to fit properly.

Due to multiple sources used by the auto manufacturer,

some pedals may have to be trimmed for the pedal

cover to fit properly.

1

Résumé du contenu

Page 1

‘55 ’56 ‘57 (Tri-Five) ChevyNon-Power Brake Pedal#199550 / #199555Tools Needed:• 3/32” drill bit• 5/16” drill bit• Spray Adhesive• Center punch• 7/16”

Commentaires sur ces manuels

Pas de commentaire