500 Shawmut Avenue • La Grange, Illinois 60526 • Tech Line 708/588-0505 • Fax 708/588-7181
#77900 - Power Steering Hose Kit
Tools needed:
• 1” open end wrench
• 15/16” open end wrench
• 11/16” open end wrench
• Electrical/vinyl tape
• Hacksaw with ne tooth metal blade OR cut off wheel
Tech Tip:
Install the proper adapter into the Rack/Box. Do not use Teon tape or pipe dope,
this can get into the system and do substantial damage. Inverted are ttings should
be torqued to 25-24 ft/lbs and O-ring ttings should be torqued to 20 ft/lbs.
Applications:
• GM metric rack & pinion
• 1978 - present GM metric 800 gear box
• 1965 - 77 GM SAE 800 gear box
• Classic Performance Products - 500 Series box
• Flaming River rack & pinion
• Dodge Omni rack & pinion
• 1974-77 Ford Mustang II rack & pinion
* A power steering adapter kit (#77901) is available for other applications, call for info 1 (708) 588-0505.
Before Installing This Hose Kit:
Install the Tru Trac or V Trac system in vehicle.
Position the remote power steering reservoir as close to the power
steering pump as possible. The remote power steering reservoir
should also be mounted higher than the power steering pump. The
radiator core support works well as a mounting location for the
reservoir in most cases.
If your application is not listed below...
Do Not Attempt To Install This Kit*
Step 1: Prepare the ttings and adapters for installation. Use the guide below to select the correct adapters for your application.
Compare the existing hose ends to the adapter if you are unsure of the box/rack that you have.
•Denotes number of ttings
required for the listed application
•
•
Rev. 07/08
11/16-18 inverted are to
-6AN power steering adapter
1/2-20 inverted are to
-6AN power steering adapter
5/8-18 inverted are to
-6AN power steering adapter
M18 x 1.5 O-ring to -6AN
power steering adapter
M16 x 1.5 O-ring to -6 AN
power steering adapter
M14 x 1.5 O-ring to -6 AN
power steering adapter
-6 AN 90˚ hose end
-10 AN 90˚ hose end
-6 AN straight hose end
-10 AN straight hose end
GM Metric Rack & Pinion
• • ••• • • •
1978-up GM Metric 800 gear box
• • ••• • • •
1965-77 GM SAE 800 gear box
• • ••• • • •
Classic Performance Products
500 Series gear box
• • ••• • • •
Flaming River Rack & Pinion
• • ••• • • •
Dodge Omni Rack & Pinion
• • ••• • • •
1974-77 Ford Mustang II
Rack & Pinion
• • ••• • • •
Commentaires sur ces manuels