Billet-specialties Premium Tru Trac Serpentine System - Big Block Chr Manuel d'utilisateur télécharger pdf (Page 18)

www.billetspecialties.com

Figure 13: Install A/C Compressor Manifold

Important!

• Only remove sealed cap on compressor if you plan on charging you’re A/C system.

Immediately, leaving the compressor open to outside air can introduce moisture into

the system causing the cooling system not to operate properly.

• Never connect the compressor clutch wire and run the compressor unless the system is

completely charged. Serious damage may occur to the compressor.

(A) Attach the compressor manifold by removing the protective cover and

placing the manifold onto the compressor.

Apply anti-seize to the two M8-1.25 x 25mm socket head cap screws and thread

through manifold into the compressor and tighten firmly.

Compressor Oil

• Although the compressor is supplied with oil, the level may not be correct for the entire

system. Consult the instruction manual of the air conditioning unit for proper levels and

system charging procedures.

• Billet Specialties recommends having your air conditioning charged and serviced by an

automotive air conditioning service center with the proper equipment to ensure many

years of trouble free service.

(A)

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Billet-specialties Premium Tru Trac Serpentine System - Big Block Chr Manuel d'utilisateur Page 18