Billet-specialties Premium Tru Trac Serpentine System - Small Block F Manuel d'utilisateur télécharger pdf (Page 9)

www.billetspecialties.com

Figure 11: Install Power Steering Bracket & Pump

If your kit does not include power steering proceed to Figure 12.

A] Place power steering bracket onto timing cover. Thread the two

3/8-16 x 1-1/4” socket head cap screws into bracket and tighten.

B] Attach power steering pump to bracket with two 5/16-24 x 3” socket head

cap screws and 5/16” split washers and tighten firmly.

Figure 12: Install Crank Damper

At this time install the 4-bolt damper

and tigthen firmly.

Figure 13: Install Coupler Spacer & Stud

A] Apply anti-seize to the 3/8-16 x 1-1/4” threaded stud and thread into the top

passenger side ear of the timing cover & tighten.

B] Apply anti-seize to the exposed threads. Disassemble the tensioner coupler

assembly and thread the long spacer nut onto stud and tighten.

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Billet-specialties Premium Tru Trac Serpentine System - Small Block F Manuel d'utilisateur Page 9