Billet-specialties Tru Trac Serpentine System - LS7 (Top Mount) Manuel d'utilisateur télécharger pdf (Page 7)

www.billetspecialties.com • Tech Line 708.588.0505

LSx Top Mount Tru Trac - 13455 / 13475

Figure 6: Install Water Pump Pulley

Apply LocTite to the threads of the four 5/16-24 x 3/4” socket head cap screws.

[A] Install Water pump pulley as shown and tighten firmly.

Figure 7: Install Crankshaft Pulley

Apply LocTite to the threads of the three 3/8-16 x 1-1/4” socket head cap screws.

[A] Install crank the pulley as shown, install the Belleville washers as shown with the cup

facing away from the head of the fasteners. Tighten firmly.

A Cup Towards Engine

Figure 5: Install Alternator Bridge Bracket

Apply anti seize to the threads of two 8mm-1.25 x 25mm flat head cap screws.

[A] Place alternator bracket on driver side of water pump and line up holes with standoffs.

Thread fasteners through bridge bracket and into standoffs and finger-tighten.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Billet-specialties Tru Trac Serpentine System - LS7 (Top Mount) Manuel d'utilisateur Page 7