Billet-specialties Premium Tru Trac Serpentine System - Small Block C Manuel d'utilisateur télécharger pdf (Page 5)

www.billetspecialties.com • Tech Line 708.588.0505

Small Block Chevrolet Tru Trac - 13225 / 13125

Figure 3: Install Power Steering Bracket

Kits Without Power Steering:

For kits without power steering apply anti-seize to the two (2) 3/8-16 x 1-1/4" socket head cap

screws and install through lower end of the alternator bracket and into the block. Tighten

firmly.

Kits With Power Steering:

A] For kits with power steering apply anti-seize to the two (2) 3/8-16 x 2" socket head cap

screws and install by threading through the power steering bracket as shown above, through

the alternator bracket and into the block. Tighten firmly.

Figure 5: Install Water Pump

A] Install the included water pump by sliding the unit over the exposed ends of the block

mounting studs previously installed.

Figure 6: Install Stainless Stand-offs

A] Apply anti-seize to the exposed threads

of the block mounting studs and attach the

stainless standoffs as shown with hex end

out. Only hand tighten at this time.

B] Make sure to install the shorter (1-3/4")

stainless stand-off on the lower passenger

side block mounting stud as shown. Hand

tighten at this time.

Figure 4: Install Lower Tensioner

Bracket

Apply anti-seize to two (2) 3/8-16 x 2"

socket head cap screws.

A] Locate and install the lower

tensioner bracket by threading the

two 3/8-16 x 2" socket head screws

through the bracket and into the lower

mounting bosses on the passenger

side of the block. Tighten firmly.

A A

1 2 3 4 5 6 7 8 9

Pas de commentaire

Billet-specialties Premium Tru Trac Serpentine System - Small Block C Manuel d'utilisateur Page 5