Billet-specialties Tru Trac Serpentine System - LS7 (Top Mount) Manuel d'utilisateur télécharger pdf (Page 10)

www.billetspecialties.com • Tech Line 708.588.0505

LSx Top Mount Tru Trac - 13455 / 13475

Figure 12: Install Belt & Tensioner Pulley

Route belt as shown below minus tensioner pulley.

[A] Place a 5/8” socket attached to a breaker bar on tensioner nut at approximately the

12 o’clock position, align belt onto grove of tensioner pulley.

[B] Pull breaker bar clockwise until tensioner boss lines up with hole in tensioner pulley, slide

pulley onto boss and slowly return wrench to starting position, applying tension to the belt.

Apply anti-seize to the threads of the 3/8-16 x 3/4” ARP 12pt. cap screw.

[C] Thread ARP 12pt. cap screw with aluminum washer onto tensioner boss and tighten firmly

(46 ft/lbs.).

WITH POWER STEERING WITHOUT POWER STEERING

A B

1 2 ... 5 6 7 8 9 10 11

Pas de commentaire

Billet-specialties Tru Trac Serpentine System - LS7 (Top Mount) Manuel d'utilisateur Page 10